The use of afterburner pipe clamp methods and precautions

The use of afterburner pipe clamp methods and precautions
       The use of afterburner pipe clamp
       (1) Select the appropriate pipe fittings of different specifications specifications afterburner pipe clamp;
       (2) the specifications of the manifold block pipe wrench used must not exceed the specified maximum torque;
       (3) use of force should be toward the vertical or horizontal direction;
       (4) after the workpiece must be clamped firmly to prevent slipping wounding;
       (5) does not apply excessive force when turning to prevent overload damage;
       Note:
       (A) not long at minus 20 ℃ or less and 300 ℃ or more.
       (2) shall not be located in the afterburner rod coupled with the other sleeve.
       (3) tube clamp teeth and adjusting nut to keep clean;
       (4) This product can not be used as a hammer;

 cutting machine classification range of applications
Cutting Machine Image

Cutting machine to distinguish from the cutting material is divided into metal and nonmetal materials cutting machine cutting machine.

Metal cutting machine into flame cutting machine, plasma cutting machine, laser cutting machine, waterjet cutting machines;

Nonmetallic material cutting machine cutting machine tools mainly.

Cutter way to distinguish from the control is divided into CNC cutting machine and manual cutting machines.

CNC cutting machine is reusable fitting to use the digital process-driven machine movement, with the machine movement, the cutting tool with a random distribution of the object to be cut. This mechatronic

Of the cutting machine it is called CNC cutting machine.

Laser cutting machine is efficient fastest, highest precision cutting, cutting thickness is generally small. Plasma cutting machine cutting speed quickly, cutting surfaces have a certain slope.

Flame cutting machine for carbon steel in thicknesses greater.

Applications
Cutting machine application of metal and nonmetal industry, in general, non-metallic SECTOR rather meticulous cutting stone like a stone cutting machine, water jet cutting machine, serrated cut

Cutting machines, cutting fabric and plastic, chemical products used in laser cutting machine, cutting machine blade, cutting metal materials are flame cutting machines, plasma cutting machine, flame cutting

Machine inside was divided CNC cutting machine, and manual two categories, the categories are manually, small car, semi-automatic, pure manual, CNC there, gantry CNC cutting machine, cantilever CNC

Cutting machine, desktop CNC cutting machine, CNC intersecting line cutting machine and so on!

Cost
The most expensive laser cutting machine is the highest accuracy and efficiency a high-tech cutting equipment, waterjet cutting machine, followed by flame cutting machine is also relatively cost again bottom

, Plasma cutting machine using the lowest cost (calculated per piece)!

Edit this paragraph
Outlook

Generally CNC flame manifold block cutting machines, plasma cutting machine holds a large part of the user, and later fine plasma, laser cutting will replace the former, as the main

Stream cutting machines, because they are environmentally friendly, cutting speed, cutting quality is good!

hydraulic valves - Flow control valves

An adjustment between the spool and the valve orifice area and local resistance it generates flow rate is adjusted to control the velocity of the actuator. Flow control valve use is divided into five kinds. ⑴ throttle: fixed orifice area in tune after the load in a uniform pressure changed little less demanding and motion actuator velocity remained largely stable. ⑵ control valve: pressure changes in load can keep the throttle valve pressure drop is constant. Thus, in the orifice area after it is set, regardless of how the changes in load pressure, control valve can maintain a manifold block constant flow through the throttle valve, so that the movement of the actuator speed and stability. ⑶ shunt valve: no matter the load size, can make the same oil source for the two actuators for the same amount to get equal flow diverter valve or sync valve; been prorated for the proportional flow diverter valve. ⑷ manifold valve: the role of contrast with the diverter valve so that flow manifold valve flow prorated. ⑸ flow diversion valve: both shunt valve and manifold valve two functions.