Hydraulic Hose Fittings high pressure nylon resin tube

Steel wire reinforced nylon elastomer resin tube is mainly used in the automotive, parher metric hydraulic hose fittings construction machinery, hoisting and conveying machinery high-voltage transmission and transmission fluid, has good oil resistance, heat resistance and aging resistance, withstand high pressure, pulse performance, can be used as high-pressure painting, pressure washer exclusive possession.

Fiber reinforced nylon elastomer resin pipe because of high pressure, high temperature resistance, abrasion resistance, oil and a variety of chemical reagents and anti-aging,  long life and other characteristics of the various industries use very extensive.

1, the car's braking system pressure;
2, the car's power steering system;
3, the car's brake pipe control systems;
4, the transmission control system;
5, construction machinery, such as: excavators, loaders, cranes, hydraulic conveyance system and parher reusable hydraulic hose fittings hydraulic control system;
6, machining equipment, hydraulic operation and the hydraulic control system;
7, high-pressure spray tube;
8, the liquid resin conveying pipe.

Hydraulic Hose Fittings universal testing machine using the operating method

1. Clamping the specimen for tensile specimens, first unscrew the pump delivery valve actuated, so that the working piston rises a short distance, and then close the delivery valve, one end of the sample clip in the upper jaw, dynamometer cleared , and then adjust the lower parher reusable hose fittings jaw, the lower end of the specimen holder, you can start the test, gripping the specimen should be carved jaws clamped sample size range. Sample should be caught in the jaws of the length, the two jaw position must be consistent and to be fully aligned with the central fixation.

hydraulic fittings manufacturers Three valve action

Use the "three valve" in the flow sensor meter access process piping, is to:
1, in the pipeline from the initial state (empty) join the media, on both sides of the pressure sensor will

suddenly change, pressure increases,parher hydraulic fittings suppliers in order to avoid, you should turn off the sensor on both sides of the

valve A, B, open the bypass valve C;
2, the pipe filled with the medium, and approaching the stable equilibrium, gradually opened A, B, parher reusable hydraulic fittings pressure

is applied uniformly on both sides of the sensor;
3, and finally close the valve C, the sensor to work properly;
4, close order on the contrary.
In addition, there are other 3 valve effects, such as cleaning the pipeline for  some time after the operation, the sensor is unaffected parher hydraulic fittings manufacturers(pipeline is bypassed).

american fittings and wire braided hose

Product Structure Type:
Steel braided hose structure is composed of liquid-resistant synthetic rubber inner layer, middle layer, Ⅰ or Ⅱ or Ⅲ layer wire braid reinforcement, and weather-resistant synthetic rubber Japanese Adapter with excellent performance cover.
Product Features:
1 Hose special selection made british hydraulic adapter with synthetic rubber with excellent oil resistance, heat aging resistance.
(2) Hose high pressure, pulse performance.
3 tube tightly, use a soft, small deformation under pressure.
4 hose has excellent resistance around the song and fatigue resistance.
5 wire braided hose length is greater, φ32 length of 20 meters or more, φ25 can connect up to ten meters or even less than one hundred meters.
Applicable temperature: Oil -40 ℃ - +100 ℃, air -30 ℃ - +50 ℃, +80 ℃ water emulsion or less, than please choose our specific products.