hydraulic plate bending machine structural characteristics

Hydraulic plate bending machine structure and characteristics:
(1) hydraulic drive, the machine at both ends of the fuel tank is placed in the slider, the direct drive slide work.
(2) using the machinery of block structure, stable and reliable.
(3) slide stroke motor fast tune, manual fine-tuning, the counter display.
(4) Solid steel welded construction of sufficient strength and rigidity.
(5) slider synchronization mechanism with torsion bar forced synchronization.
(6) Wedge deflection compensation agencies, in order to guarantee access to high bending accuracy.
Hydraulic plate bending machine, hydraulic hose clamps cylinder, end caps, cylinder, the outer piston rod flange set, piston rod, screw, nut and gland; end caps fixed in the cylinder at one end and screw sets , the other end of the fixed nut and gland in the cylinder, the outer piston rod located in the cylinder body, the flange is to be placed on the outer piston rod piston side of the piston within the piston rod end inserted into the outer piston rod within the piston fixed installation of the rod end of the rod end cap, within the piston rod within the opening oil duct. Hydraulic fittings cylinder more than the traditional kind hydraulic cylinder a rod chamber and the rod chamber, and thus has a unique quick drive function in the hydraulic system of the same driving conditions, fuel tanks owned or weightless out knife conditions still can be easily two growth; screw sets of contact with the force area is much larger than the traditional bending machine, hydraulic cylinder adjustment nut, thereby increasing the contact stiffness and stability, to ensure better accuracy of the limit.