Vertical Composite crusher Description:
Vertical compound crusher, vertical broken machine, also known as composite broken, is one of the commonly used equipment in the crushing production line and sand production line. The vertical crusher is a financial hammer to break back-breaking as one of the new efficient crushing equipment, with production capacity, high crushing efficiency, crushing, abrasion amount of small, low power consumption, good sealing, smooth operation, convenient maintenance and so outstanding advantages.
Zhengzhou long macro Machinery Manufacturing Co., on the basis of domestic and foreign advanced crushing equipment, optimize the design from a new crushing and coarse grinding of broken equipment can be widely used in the cement plant raw material, clinker crushing operations, but also can be used for medium hardness material, dolomite, flint, lead and zinc, serpentine, blast furnace slag, coal gangue, phosphate rock and other minor operations, especially for hard limestone, dolomite, granite, basalt and other artificial sand or highway pavement of stone c rushing.
Vertical crusher works
Broken the project, the material composite crusher (Compound break) the upper part of the vertical fall into the high-speed rotation of the impeller, high-speed centrifugal force, with another part of the umbrella form of triage in the material of the impeller around the high-speed crash and smash material after the impact each other, will in between the impeller and the casing materials form a vortex repeatedly hit each other, friction and grinding, straight from the lower part of the discharge, the formation of the closed-loop recycled many times, controlled by the screening equipment to reach the required finished granularity.
The vertical crusher directly to the maximum particle size of 600-1800 mm material crushing to 25 or 25 mm below a broken crusher. The device is driven by the motor rotor high-speed rotation of the crushing cavity. Material fro m the upper to the mouth to feed into the machine, high-speed movement of the hammer blow, impact, shearing, abrasive and grinding. The lower part of the rotor, has a sieve, crush the grain size smaller than the mesh size in the material is discharged through the sieve is greater than the sieve size of coarse grade retention continue to be a hammer blow and grinding, and finally in the sieve through the sieve board is discharged outside the machine.
Characteristics of the vertical compound crusher
Composite crusher device broken than large, broken high-water content, ideal for high moisture content of materials processing discharge size can be adjusted, no sieve set containing a large quantity of sediment material will not clog. can not be broken material into the body can be automatically removed and will not cause damage to the equipment. The equipment crushed the DC of the special materials and high production efficiency, a unique structure, smooth operation, lo w noise, and maintenance side cases open the work Kurakado easily replace the damaged pieces. Can be summarized into about eight:
(1) the combined structure is simple, low running costs. Stone at the stone principle, wear and tear.
(2) crushing ratio, energy saving.
(3) crushing, coarse features.
(4) The moisture content of materials affect, the moisture content up to about 8%.
(5) working noise below 75 decibels (db level), less dust pollution.
(6) suitable for crushing hard, extra hard materials.
(7) into a cube, packing density, and minimal iron contamination.
(8) impeller self-lining wear and easy maintenance.
Vertical Crusher The main purpose
This product is widely used in a variety of ores, cement, refractories, bauxite, carborundum, glass raw materials to high-hard, extra hard materials in the field of crushing. Been widely used mechanism for building sand, stone and a variety of metallurgical slag crushing, high yield efficacy compared with other types of crushers.
没有评论:
发表评论