hydraulic piping systems - pipeline stent

Web Design And Seo For www.china-webdesign.com

china hydraulic hose - China Manufacturer

Thank you for inquiry my china hydraulic hose, Tel : +86-0574-88461212, E-mail:ph@ph-fitting.com

http://www.ph-fitting.com/

    The design of piping systems should consider the following factors:

A. The pipeline should not be by other channels to support, can not be used to support other components.

(2) should be avoided whenever possible vibration from other equipment and machinery to pass ove r.hydraulic hose sleeve

Design stents should be considered in the heat transfer.

(4) the stent as close as possible to the position of the elbow (elbow on both sides)

Hose connection, bracket should be placed on the end of the pipeline.hydraulic hose clamps

Hose clamp material should also have the silencer and anti-wear (when the pipe moves) function. Hose clamp according to DIN 3015-1 ... 3 of the standard.

We recommend that the hose clamp spacing in the shipbuilding industry and industrial areas can refer to Schedule (if required, are available upon request). The final hose clamp spacing depends on the project\\ s specific requirements.

    The temperature of the hydraulic system may vary widely, especially in the areas of ship and ocean engineering. Under certain conditions, the temperature, for example, from minus 40 ℃ in winter to 40 ° C in summer, and this temperature change can cause the pipe thermal expansion or cooling to 80 ° C temperature difference, every meter of pipe changes in the length of close to one millimeter. Linear changes in the steel pipe can refer to the Schedule (if required, are available upon request).split flanges