Installation and commissioning of a new hydraulic equipment, general precautions are as follows:
(A) install the assembly, the first into the main hydraulic parts and accessories subject to stringent cleaning and removal of rust and against everything dirt harmful to the working fluid. Hydraulic parts and pipe the oil port plug, plastic plug, plugs, etc. With the gradual dismantling of the progress of the project, instead of first relieved, to prevent dirt from port to enter inside the components.
(B) must ensure that the inner and outer surfaces of the tank, the the host mating surface and the other visible constituent element is clean.skiving machine
(C) the components in contact with the working fluid over the exposed parts (e.g. piston rod) should be protected to prevent dirt from entering.
(D) fuel tank cap, nozzle and air filter must be fully sealed to ensure that the unfiltered air into the hydraulic system.
(E) shall provide an explanation in the fuel tank or near the fuel tank at the nameplate of the oil type and system capacity.bsp connector
(F) the working fluid filtration equipment specified to the required standard of cleanliness, and then injected into the system before.
(G) The hydraulics work agencies joined together to complete the scheduled action, so pay attention to the quality of the connection assembly between (as Heart degrees, relative position, force status, fixed and sealed good or bad).hydraulic fittings suppliers
没有评论:
发表评论