Hydraulic equipment manufacturers in products manufactured before the user units after the installation of the new equipment as well as equipment after repair of hydraulic equipment in accordance with the relevant standard debugging.
A technical preparedness, familiar with the equipment being debugged
Carefully read the manual of the equipment, a comprehensive understanding of the use of hydraulic equipment, technical performance, the main structure, equipment accuracy standards, use requirements, safety requirements, operating with the use of methods, commissioning Note.
Digestion hydraulic system diagram and figure out what works and performance requirements of the hydraulic system, hydraulic, mechanical and electrical three functions and mutual contact this purpose must be clear, the action sequence and linkage relationships, familiar with the various components of the hydraulic system in the actual location on the device, and their role, performance, structural principle and adjustment method. Also to analyze the circulation and movement of the order of the actions of the executive components of the hydraulic system and the oil line, pressure and flow rate. Possible equipment safety accident site on how to take effective prevention and contingency measures.
Determined on the basis of the above considerations debug content, steps, and debugging methods.hydraulic hose assemblies
Second, pre-commissioning check
(A) prior to the test machine exposed in the appearance of hydraulic components and lines then scrub, scrub with a sponge disabled cotton yarn.
(B) rail, fuel filler and other sliding vice as required to add a little oil.
(C) Check the oil pump spin to the fuel tank, motor oil and the oil pump out of the tubing is wrong.hydraulic ferrule
(D) Check all hydraulic components, piping connection is correct and reliable, install the wrong be corrected.
(5) examine each position of the handle, to confirm the "stop". "Back" and "unloading" position, fastening each stroke stop at the right position.
(F) Loosen the relief valve handle, appropriate to tighten safety valve handle, so the relief valve to minimum working pressure. The flow control valve to the minimum.
(G) on the power.
没有评论:
发表评论