CO2 laser cutting machine with fiber laser cutting machine comparison

CO2 laser cutting machine with fiber laser cutting machine comparison
From the modern laser cutting, welding machine applications and the technical requirements of the user point of view, laser cutting, welding is undoubtedly the future direction of development of high power, large format

, High efficiency, a molding, high intelligence.
HGLaser Fali Lai has been committed to high power laser and plasma technology applications. The primary focus here is CO2 and fiber laser cutting machine laser cutting machine processing

The difference:
First, as the mainstream of traditional laser cutting, welding equipment are used CO2 laser, can be stabilized teflon hose within 20mm cutting carbon steel, 10mm stainless steel within, 8mm

The following aluminum alloys. Fiber laser cutting of thin plate 4mm or less obvious advantages, by the impact of solid-state laser wavelength when it is of poor quality in the cutting plate. Laser cutting

Cutting machine is not a panacea, CO2 laser wavelength of 10.6um, solid state lasers such as YAG or fiber laser has a wavelength of 1.06um, the former is more likely to be non-metallic

Absorption can be high quality for cutting wood, acrylic, PP, glass and other non-metallic materials, which are not easily absorbed non-metallic, non-metallic materials, it can not be cut

However, when confronted with two lasers copper, silver, aluminum high reflective materials when they do nothing.
Secondly, because of both the CO2 and fiber laser wavelength difference of one order of magnitude, the former can not be used in optical fiber transmission, optical fiber transmission which can be used, greatly increasing the

The degree of processing flexibility. Early in the fiber laser market before, in order to achieve three-dimensional processing, we use highly sophisticated optical technology through the joint action with the

States combined CO2 laser reflector system will lead to a three-dimensional surface surface to achieve a three-dimensional CO2 laser machining, precision machining of this technology because of the technical limitations of domestic primary

Rests in the hands of very few European and American countries, expensive, high maintenance requirements, the fiber laser market share gradually expanding at the same time has been gradually losing its market.

The fiber laser because it can be transmitted through the fiber, the degree of flexibility than ever before, especially for the automotive industry, because basically about 1mm thin surface

Processing, fiber laser with the same flexible robotic systems, low cost, less point of failure, easy maintenance, fast and doing my part to firmly occupied this city

Field.
Again, the fiber laser photoelectric conversion rate of up to 25%, while the CO2 laser photoelectric conversion rate of only about 10% in electricity consumption, cooling systems and other aspects of supporting light

Advantages of fiber lasers is fairly obvious, if the fiber laser manufacturers some more, and then right price point, and solve the plate cutting process, CO2 laser subjected

Threat will be large. However, socketless fitting the fiber laser as a new laser technology, penetration is far less CO2 laser, its stability and reliability, after-sales service

Convenience market's long-term remains to be seen.
It is worth mentioning that, according to international safety standards, hazard rating of 4 laser, CO2 laser is the least harmful one, while the fiber laser wave length due to the human body by the

So great damage to the eyes, are the most harmful one, for security reasons, fiber laser processing needs fully enclosed environment.
In addition, the fiber laser with a robotic flexible manufacturing systems in the automotive industry and supporting industries, high-status a long time, used to be monopolized by foreign integrators, nearly

Years as the financial crisis and the automotive industry production technology continues to improve, especially in the domestic high-end manufacturers such as laser technology HGLaser Fali Lai in support of national policy

On technology research, many foreign car brands and high-end national brand gleaned crabs, the share of foreign high price arrogant and secretive veil has been lifted, tearing, laborers

Laser Farleylaserlab car users in recent years to provide automotive BIW welding, laser weakening car dashboard, airbag laser welding, car bumpers, car

Doors, columns and other robots in flexible cutting, laser welding car bumpers, car exhaust pipe line welding system, car gearshift sleeve automatic laser cutting equipment, etc., in a

Households live 24 hours a stable and efficient production, allowing users praised the laborers Fali Lai also let foreign integrators shouted, "wolf"!
In summary, laser applications should be directed towards the application of high-power CO2 laser in a more stable, more large-format, faster machine. 2mm below the surface for processing

Fiber laser is an advantage.