Hydraulic pipe installation should pay attention to several issues

Hydraulic Pipe installation must note the following:
One should be based on the hydraulic system pressure, flow, working medium, the right to use the environment and hydraulic components and fittings requirements, selection of appropriate diameter, wall thickness and material of the pipeline.
(2) should be considered in the pipeline piping neat appearance and easy maintenance. Preferably arranged in parallel lines, less cross. Parallel or crossover between the tubes should be at least 10mm clearance to prevent contact between china hydraulic hose the pipe and vibration, and fittings to install sufficient space.
3 tube length should be as short as possible, thus reducing the pressure loss and delay and vibration phenomena.
4 the pipe bend radius R of the center line and outside usually determined to be greater than three times the diameter of the tube. Also take a large diameter hours.
5 In the Configure piping system, the force of the pipe to prevent sagging and vibration, you must set pipe supports and pipe clamp the pipe to the bracket. Distance between supports varies with pipe diameter, generally selected within 0.4 ~ 1mm.